Accessories for Rotary Tools
Power Your Projects - Store Your Batteries
Secure your rotary tools - upgrade Power Wheels toy cars
3D Printed - USA Made
Rotary Tool Clamp
for Dremel Model 4000 - 4200 Fits Bench Vise
- Fits the body of a Dremel Model 4000 rotary tool. Fits into bench vise. Lightly clamping the vise secures the rotary tool. Together you have an instant bench mounted grinder/ cutoff wheel.
- REQUIRES you have or get a Dremel Model 4000 or 4200 rotary tool. Fits current production Model 4000 and 4200. DOES NOT fit 100, 200 series, or models 395, 3000, 4300, 8220
- Designed in CAD and printed on PrintRBot in PLA plastic.
- Sorry, Dremel changed the body dimensions. Model 4000 and 4200 have recessed sides. Holder has ridges to grab the recessed sides. Ridges are beveled to ease put-on and take-off. Also has holes for #8 sheet metal screws. Holes are 2.75" center to center. Model 4000 or 4200 can be mounted right side up or inverted (rotated). See photos.
- You get 1 of the RED holders shown in the photo (the yellow holder is a different model)Part number: DH4000V.
- This offer does not include the Dremel tool, the vise, the table, the belt sander or anything else in the photos.
- Delivered via 1st class mail in padded envelope with tracking number service.
Rotary Tool Clamp
for Dremel 100 200 300 395 Fits Bench Vise
- Dremel Holder to fit bench vise fits models 395, 300, 200 & 100
- Need to hold your Dremel or rotary tool securely? This holder fits a bench vise.
- Fits the 47mm diameter section of the rotary tool. Fits into bench vise. Lightly clamping the vise secures the rotary tool. Together you have an instant bench mounted grinder and cutoff wheel.
- REQUIRES you have or get a rotary tool with 30 mm long ROUND section. Round section is 46-47mm diameter. See the photos and measure your rotary tool. Fits current production 100 and 200 series, Model 395, Sears Model 572.
- Designed in CAD and printed on PrintRBot in PLA plastic.
- YOU GET ONE OF THE BLUE HOLDERS SHOWN IN THE PHOTO. The green holder is a different model.
- Part number DH-47V. This offer does not include the Dremel / Craftsman tool, the vise, the table, the belt sander or anything else in the photos.
- Delivered via 1st class Mail in padded envelope with tracking number service.
Rotary Tool Clamp
for Dremel 3000
Fits Bench Vise
- Dremel Holder to fit bench vise fits model 3000
- Fits the TAPERED body of a Dremel Model 3000 rotary tool. Fits into bench vise. Lightly clamping the vise secures the rotary tool. Together you have an instant bench mounted grinder/ cutoff wheel.
- REQUIRES you have or get a Dremel Model 3000 rotary tool. Fits current production Model 3000.DOES NOT fit 100 and 200 series, or models 395, 4000, 4200, or 8220
- Designed in CAD and printed on PrintRBot in PLA plastic.
- Sorry, Dremel changed the body dimensions. Model 3000 has a tapered body and recessed sides. Pretty, but difficult to secure. This holder has ridges to grab the recessed sides. Ridges are beveled to ease put-on and take-off. Holder is also tapered along the motor axis. It has markings for the CORD end and the CHUCK end. Grabs very well. Also has holes for #8 sheet metal screws. Holes are 3" center to center. Screw it down to a table or a 2x4.
- You get 1 of the Brown holders show in the photos. Part number: DH3000V
- This offer does not include the Dremel tool, the vise, the table, the belt sander or anything else in the photos.
- Delivered via 1st class mail in padded envelope with tracking number service.
Rotary Tool Clamp
for Dremel 4000
Fits Vise or Table
- Fits Dremel models 4000 and 4200Fits into bench vise. Lightly clamping the vise secures the rotary tool. Included pinch bolt (#6 x 2") locks Dremel into holder. Holes for #8 x 1" screws. Mounts to table top, 2x4 or 1x4. Screws not included.C clamp to edge of table.
- Together you have an instant bench or table mounted grinder / cutoff wheel.
- REQUIRES you have or get a Dremel Model 4000 or 4200 rotary tool.Does NOT fit Model 4300.
- Designed in CAD and printed on PrintRBot in PLA plastic.
- You get 1 of the YELLOW holders Part Number DH-4000VT (the red holder is a different model)1 #6 x 2" bolt and #6 nut shown in the photos.
- This offer does not include the Dremel tool, the vise, the table, the belt sander or anything else in the photos.
- Ships 1st Class Mail in a Padded Envelope
Rotary Tool
Clamp for Dremel 100-300 Vise or Table Mount
- Need to hold your Dremel or rotary tool securely? This holder fits a bench vise.
- Fits the 47mm (1.85") diameter section of the rotary tool.Fits into bench vise. Lightly clamping the vise secures the rotary tool. Included pinch bolt (#6 x 2") locks rotary tool into holder. Holes for #8 x 1" screws. Mounts to table top, 2x4 or 1x4. Screws not included.C clamp to edge of table.
- Together you have an instant bench/ table mounted grinder/ cutoff wheel.
- REQUIRES you have or get a rotary tool with 30 mm long ROUND section, Round section is 46-47 mm diameter. See the photos and measure your rotary tool. Fits current production 100 and 200 series, Model 395, Sears Model 572.
- Designed in CAD and printed on my PrintRBot in PLA plastic.
- You get 1 of the Green holders,1 #6 x 2" bolt and #6 nut shown in the photos.This offer does not include the Dremel/ Craftsman tool, the vise, the table, the belt sander or anything else in the photos.
- Ships 1st Class Mail in a Padded Envelope